Images for all of the Xtreme 4x4 shop parts.
-
Matco Tools
The shop is stock with a full set of Matco hand tools, shop equipment, and diagnostic equipment.
Phone: 888-696-2826
www.matcotools.com
-
Matco Lift
Three and a quarter ton capacity, two post hydraulic lift.
Phone: 800-696-2826
www.matcotools.com
-
Patton's Air Compressor & Dryer
The shop has a full-sized industrial-strength, heavy-duty unit from Patton (left) that never falters no matter how much we tax it. They remove moisture -- allowing clean, cool air to flow. The result is an efficient compressed air system that reduces energy costs and eliminates clogged pipes and valves. The MuscleCar shop has this unit plumbed in to insure efficiency and longevity.
Phone: 704-523-4122
www.pattonsinc.com
-
Col-Met Paint Booth
Every painting project gets the benefit of the Col-Met full-sized downdraft paint booth. Constructed of 18-gauge steel, its highly efficient fans pull clean air down and filters it out the sides. Extra-clean and safe paint jobs result.
Phone: 888-452-6684
www.colmetsb.com
-
Patton's Compressed Air Piping
All the PowerBlock shows use Patton's Infinity compressed air pipe to route air wherever it's needed. It is 100% metal, non-corrosive, has high-flow rates and low pressure losses because it is smooth-bore tubing, and has a 10-year leak free guarantee on materials. Easy assembly and disconnect with solid nickel plated couplings.
Phone: 704-523-4122
www.pattonsinc.com
-
TubeShark "Sharkpool" Bender & Notcher
Here's a rolling roll-cage maker. Get the most from these two essential metalworking machines, while keeping your die sets, tools and accessories organized. All-in-one on a heavy duty steel rolling bench. The bender creates up to 180-degree quality bends, either round or square forms. Its capacity is 1/2 2-inch, 0.188 wall. The notcher has an industrial two-speed drill motor and is rigid in its 1/2-inch steel frame for precise, gap-free, notches.
Phone: 541-382-1573
www.tubeshark.com
-
Dake 350 Cold Saw
The 3-speed, manual Dake 350 circular cold saw has a 14” diameter blade and cuts up 4-3/4” diameter tubing and 6-1/4” x 3-1/2” rectangles. The cold saw head rotates to 90° for slotting. It has a cam-activated vise for quick clamping and release. The large spindle and gear has an adjustable clutch to prevent over feeding the blade.
Phone: 800-937-3253
www.dakecorp.com
-
Dake Press
This 2 HP, three-phase Dake hydraulic press has a double-acting cylinder, a ram with lifting eyes for the table, and rapid ram advance. With its welded heavy steel plate frame, it handles everything we throw at it.
Phone: 800-937-3253
www.dakecorp.com
-
Dake Belt Sander
The powerful metal fabricating belt grinder has a 4 h.p. motor with belt speed of 6,600 fpm for rapid metal removal. Advanced belt tracking with a fixed position front wheel eliminates belt walk-off. The hinged top cover opens for grinding large pieces on the entire length of the belt. The grinder pivots on its own steel base for easy adjustment to accommodate various work piece sizes and shapes.
Phone: 800-937-3253
www.dakecorp.com
-
Light Racing Dies
These flared hole dies are designed to eliminate edge tearing even when used on high strength 4130 chromoly sheet (normalized condition), with laser cut holes (hardened edges). Manufactured from premium hardened high carbon steel for maximum life, and useable up to a max sheet thickness of 0.090-in. for chromoly and 0.125-in for mild steel.
Phone: 800-525-6505
www.lightracing.com
-
Millermatic 251 Mig Welder
The 251 welds material from 22 gauge to 1/2 thick in a single pass. It has self-calibrating digital meters for presetting voltage and wire-feed speed. Basically, an easy to use, point-and-shoot welder for quick jobs around the MuscleCar shop.
www.millerwelds.com
-
Millermatic DVI Welder
www.millerwelds.com
-
Miller Spectrum 625 Plasma Cutter
For mild steel cutting (1/2--7/8-inch), the Xtreme 4x4'ers rely on one of Miller Welding's portable and steady plasma cutters. It's fast, induces less warpage, and makes smooth cuts.
www.millerwelds.com
-
Miller Dynasty 200
www.millerwelds.com
-
Miller Syncrowave 180 Tig Welder
For clean, high-quality, and precise welds on any metal, we use this Syncrowave 180 Tig Welder. It features adjustable penetration and cleaning action, to help eliminate tungsten spitting and arc rectification. You get aerospace quality fusion with this welder.
www.millerwelds.com
-
Official Hardware-The Industrial Depot
Full line distributor of fasteners, including standard bolts & nuts, or hard to find, made to print items. Over 35 years of fastener experience.
Phone: 866-729-9925
www.theindustrialdepot.com
-
Powder-X Powder Coating
The shop uses powder coating materials and equipment from Powder-X, as do all the shops on the PowerBlock --they are the Official Powder Coating Equipment of the PowerBlock. Powder coating produces a high quality and extremely durable finish, and Powder-X can outfit a small shop or a full industrial operation with their complete powder coating systems.
Phone: 886-326-4840
www.powder-x.com
-
Safety-Kleen Parts Washer
The Safety-Kleen sink-on-a-drum parts washer is indispensable in the shop. It has a fusible link cover, flexible metal spigot, and lamp. When we wash parts in the sink basin, the cleaning fluid drains into the drum below and is recirculated.
Phone: 800-669-5740
www.safety-kleen.com
-
Volunteer Welding Supply
The shop is kept fully stocked with welding supplies and gasses by Volunteer Welding Supply. In fact, all our PowerBlock shops rely on Volunteer for all their welding supplies and gas requirements.
Phone: 615-256-5658
www.volunteerwelding.com
-
KnKut Drill Counter Display
KnKut Performance Drills are manufactured from high grade M-7 Molybdenum high speed steel. A 135 degree split point design gives you 50% more holes per drill.
866-965-6588
www.knkut.com
